Electrical Panel Upgrade in Goleta, CA
200-amp panel upgrades for Goleta homes adding EV, AC, and solar loads.
Submit the form and we call you back within 10 minutes.
- Licensed & insured
- Trained technicians
- 24/7 Emergency Service
By submitting, you agree to be contacted by Blue Moon Electrical about your request,
200-Amp Panel Upgrades in Goleta
If your Goleta home still runs a 100-amp panel or an old fuse box, adding an EV charger, heat pump, or solar can push it past its limit. Blue Moon Electrical upgrades panels to modern 200-amp service across Old Town, Fairview, and the Patterson tracts, coordinating the City of Goleta permit and the Southern California Edison disconnect.
Most Goleta upgrades cost about $3,200 to $5,500. Panel upgrades get a free estimate.
You end up with stable power, clearly labeled breakers, and headroom for the appliances you actually plan to add. More capacity, safer breakers, and room to grow, sized to your home and inspected to code.
Submit the form and we call you back within 10 minutes.
Signs You Need an Upgrade
Breakers that trip when the AC and microwave run together, a warm or buzzing panel, or a fuse box are all signs you’ve outgrown your service. Federal Pacific and Zinsco panels, still found in 1960s-70s Goleta homes, are known fire risks and should be replaced, not repaired.
If you’re planning an EV charger, an ADU, or solar, upgrading now avoids paying twice. We assess your real load before recommending anything.
A panel upgrade is permitted work, and we handle it end to end. We pull the City of Goleta electrical permit, coordinate the temporary disconnect and reconnect with Southern California Edison, install the new service to current code, and meet the inspector so the job is signed off promptly.
That paperwork protects your home sale and your insurance, and it means your upgraded service is properly grounded and bonded for everything you connect to it.
Adding an EV charger?
A Level 2 charger often needs spare panel capacity. See how we install them in Goleta.
How much does a panel upgrade cost in Goleta?
Most upgrades from 100 to 200 amps cost about $3,200 to $5,500. We give a firm written price after an on-site assessment, and the estimate is free.
| What changes the cost | Why |
|---|---|
| Meter or service line work | Adds about $1,500 to $4,000 if the service entrance must be replaced |
| Amperage | 200 amps costs more than 100 amps |
| Panel location | Tight spots and finished walls take longer |
| Extra circuits or a subpanel | Added breakers and wire |
| Edison coordination | A longer disconnect and reconnect window adds time |
The higher end of the range usually means the meter or service line needs work. A simple swap in an easy-to-reach panel sits at the lower end.
Read the full cost guide
Signs, steps and costs for Goleta homes in one place.
What does a panel upgrade involve?
- Load check. We look at your appliances, the meter and the service entrance.
- Written price. You get a firm price after the on-site assessment.
- Permit. We pull the City of Goleta permit.
- Utility coordination. We coordinate the disconnect and reconnect with Southern California Edison.
- Installation. We install the new panel, label every breaker, and ground and bond the system.
- Inspection. The city inspector checks the work and we meet them.
Most residential upgrades are a one-day job. Power is off for several hours while we swap the panel and Edison reconnects.
Who handles the permit, and what should I prepare?
We do. You do not apply for the permit or call the utility. Before the visit, clear the area around the panel, plan for the power to be off for several hours, and make sure someone can give access to the panel and the meter. If you plan to add an EV charger, an ADU or solar soon, tell us. We can size the panel for it now.
New circuits after the upgrade
Adding rooms, an ADU or a garage? We size new circuits to your new panel.
Related Electrical Services
Circuit breaker replacement
Replace tripping, buzzing, or failed breakers.
EV charger installation
Level 2 home and Tesla charger installation, sized to your panel.
Panel upgrades near Goleta
Based in Goleta, we also serve the surrounding South Coast. If you live nearby, see our pages for these cities.
Panel Upgrade FAQs in Goleta
How much does a panel upgrade cost in Goleta?
Most upgrades from 100 to 200 amps cost about $3,200 to $5,500. The price goes up if the meter or service entrance needs work or Edison coordination takes longer. We give a firm written price after an on-site assessment, and the estimate is free.
How long does a panel upgrade take?
Most residential upgrades are a one-day job. Power is off for several hours while we swap the panel and Edison reconnects, and we line up the City of Goleta inspection to keep things moving.
Do I need 200-amp service for an EV charger or solar?
Often, yes. A Level 2 charger or a solar interconnection can exceed what a 100-amp panel safely allows. We run a load calculation to confirm before recommending an upgrade.
Do I need a permit for a panel upgrade?
Yes. A panel upgrade is permitted work. We pull the City of Goleta permit and meet the inspector.
Should I replace a Federal Pacific or Zinsco panel?
Yes. These panels are known fire risks and should be replaced, not repaired.
Can I read more before I call?
Yes. See our Goleta panel upgrade guide.
Submit the form and we call you back within 10 minutes.