Electrical Panel Installation
New panels for builds, ADUs, and replacements — sized right and inspected to code.
- Licensed & insured
- Trained technicians
- 24/7 Emergency Service
By submitting, you agree to be contacted by Blue Moon Electrical about your request,
WHAT IT IS
What Panel Installation Covers
Blue Moon Electrical’s electrical panel installation is planned around a real load calculation, not just swapping in a bigger box. Panel installation is fitting a new service panel where the work is driven by a project rather than a failure — new construction, an ADU, a major remodel, or a planned replacement. Unlike a like-for-like swap, it starts from the loads the finished space will carry, so the panel is sized, located, and laid out for the build. Done well, the electrical never becomes the thing holding up the rest of the project.
SIGNS YOU NEED IT
When You Need a New Panel
You need a new panel when you’re building, adding an ADU or addition, or gutting a space back to the studs, and the existing service simply can’t carry the result. It also applies when a panel is obsolete, undersized, or unsafe enough that repairing it no longer makes financial sense. In each case the panel is planned and sized around future loads, not simply matched to whatever happened to be there before.
New construction or a major addition
Building an ADU or finishing a large space
An obsolete or unsafe panel past repair
Adding loads the current service can't carry
Relocating the panel during a remodel
Get A Panel Installation Here At Blue Moon Electrical
HOW IT'S DONE
How the Install Goes
On a project, the panel is sized from a load calculation and coordinated with the build schedule. The electrician sets the enclosure, runs and lands the feeders, and bonds and grounds the service correctly, then transfers or runs the branch circuits and clearly labels each one. Rough-in and final inspections are coordinated with the inspector and, where the service itself is involved, the utility, so each stage of the work is signed off cleanly. Every electrical panel installation is permitted, inspected, and labeled before the job is called done.
Load calculation and panel sizing
Set enclosure, feeders, grounding, and bonding
Run and label branch circuits
Coordinate rough-in and final inspections
WHAT AFFECTS COST
What Affects the Cost
Cost reflects the panel’s size, the number of circuits, whether new service and a meter are involved, and how the install fits the larger project. New construction differs from a straight replacement, and relocating a panel adds feeder and patching work. Local permit and utility requirements factor in too. After reviewing the plans or the site, we provide a firm written quote with upfront pricing rather than a rough estimate.
HOW TO CHOOSE / TYPES
Sizing for the Whole Project
The smartest panel decision looks well past today. A panel sized only for current loads leaves no room for an EV charger, a heat pump, or a future finish-out, and a second upgrade later costs far more than spare capacity does now. We size from a load calculation that includes the things you’re likely to add, leave labeled space ready for them, and locate the panel where it stays accessible for years.
Same-day service
Ready for expert service?
Don't wait any longer! Schedule your expert electrical service with Blue Moon Electrical today and ensure that your home or business is powered safely and efficiently.
Related Panel Installation Services
Electrical Panel Upgrade
Increase service capacity to 200 amps for modern loads.
Circuit Breaker Replacement
Replace tripping, hot, or failed breakers safely.
Electrical Panel Repair
Fix hot panels, arcing, and corroded connections.
Subpanel Installation
Add circuit capacity for garages, ADUs, and additions.
All Electrical Panels services
All electrical services
AVAILABLE IN THESE AREAS
Where We Work
Blue Moon Electrical serves homes and businesses across California, Texas, Washington, and New Jersey.
California
Texas
Washington
New Jersey
EMERGENCY CALLOUT
Need Panel Installation?
Licensed crews, permitted work, upfront pricing at Blue Moon Electrical Panel Installation
Free Quote
Talk to an Expert — Request a Services
No obligation. We typically respond within 30 minutes during business hours.
- (213) 322-0128
- info@bluemoonelectrical.com
- 360 S Broadway #60, Los Angeles, CA 90013, United States
- Open 24 Hours (Sunday – Friday)
By submitting, you agree to be contacted by Blue Moon Electrical about your request.
Circuit Breaker Replacement FAQs
Common questions about cost, timing, and permits for a panel upgrade.
Q. How is the right panel size determined?
It comes from a load calculation that totals the circuits and equipment the finished space will run, plus a margin for future additions. That calculation, not a default number, sets the amperage and the number of breaker spaces the panel should have.
Q. Can the panel be moved during installation?
Yes. Panels are often relocated during a remodel for access or code clearance. It adds feeder rerouting and some patching, which we account for in the quote, and the new location has to meet clearance and accessibility rules.
Q. Is a permit required for a new panel?
Yes. New panel work is permitted and inspected, and any change to the service involves the utility. A licensed electrician handles the permit, coordinates inspections, and schedules utility work as part of the installation.