Tesla Charger Installation
Tesla Wall Connector installation — sized, mounted, and configured to charge at full speed.
- Licensed & insured
- Trained technicians
- 24/7 Emergency Service
By submitting, you agree to be contacted by Blue Moon Electrical about your request,
WHAT IT IS
What This Covers
Blue Moon Electrical’s Tesla charger installation is sized and wired specifically for the Wall Connector’s full charging speed. This is installation of the Tesla Wall Connector, Tesla’s home Level 2 charger, on a dedicated 240-volt circuit. The current Wall Connector also charges non-Tesla EVs with the right adapter, and the Universal version adds a built-in adapter. The hardware is straightforward; the value is in sizing the circuit to the amperage you want, mounting it cleanly by the car, and configuring it so it charges at the speed your setup allows.
SIGNS YOU NEED IT
What to Consider First
Before installing a Wall Connector, consider the amperage you actually want, your panel’s spare capacity, the run from the panel to the parking spot, and whether more than one charger will share a circuit later, since Wall Connectors can power-share. Choosing the circuit size up front is what determines your charging speed. As with any Level 2 install, an older or already full panel may need some attention before the charger goes in.
A new Tesla or compatible EV to charge
Wanting full-speed home charging
A panel whose capacity you're unsure of
A parking spot away from the panel
Plans for a second charger to power-share later
Get A Tesla Charger Installation Here At Blue Moon Electrical
HOW IT'S DONE
How It's Installed
After a load calculation, the electrician installs a dedicated 240-volt circuit sized to the amperage you’ve chosen, mounts the Wall Connector right by the vehicle, and wires and commissions it, setting the breaker rating inside the unit so it charges safely at full speed. The work is then permitted and inspected. If the panel can’t support the desired amperage, the available options are explained clearly before anything at all is installed. Every Tesla charger installation is permitted, inspected, and tested at full amperage before we leave.
Load calculation and amperage choice
Install a dedicated 240V circuit
Mount and wire the Wall Connector
Commission, permit, and inspect
WHAT AFFECTS COST
What Affects the Cost
As with any Level 2 charger, cost depends on the run length back to the panel, whether the panel itself needs an upgrade, and how the circuit is routed to the unit. The amperage you choose affects the wire and breaker sizing. The Wall Connector itself is either purchased separately or supplied. Rebates may apply in your area. We assess the panel and the route, then provide a firm written quote with upfront pricing.
HOW TO CHOOSE / TYPES
Wall Connector vs Mobile Connector
Tesla’s Mobile Connector plugs into an outlet and is great for travel, but it charges noticeably slower and isn’t meant as a permanent, everyday solution. The hardwired Wall Connector charges faster, looks neatly built-in, and supports higher amperage and power-sharing between multiple units. For daily home charging, the Wall Connector is clearly the better setup; we size its circuit to the charging speed you actually want rather than to some default.
Same-day service
Ready for expert service?
Don't wait any longer! Schedule your expert electrical service with Blue Moon Electrical today and ensure that your home or business is powered safely and efficiently.
Related Tesla Charger Installation Services
EV Charger Installation
Level 2 home and commercial EV charging.
Outlet Installation
Add outlets and dedicated circuits cleanly.
Outdoor Lighting Installation
Security, flood, and architectural exterior lighting.
Lighting Installation
Fixtures, chandeliers, and ceiling fans installed.
All Electrical Panels services
All electrical services
AVAILABLE IN THESE AREAS
Where We Work
Blue Moon Electrical serves homes and businesses across California, Texas, Washington, and New Jersey.
California
Texas
Washington
New Jersey
EMERGENCY CALLOUT
Need Tesla Charger Installation?
Licensed crews, permitted work, upfront pricing at Blue Moon Electrical Tesla Charger Installation
Free Quote
Talk to an Expert — Request a Services
No obligation. We typically respond within 30 minutes during business hours.
- (213) 322-0128
- info@bluemoonelectrical.com
- 360 S Broadway #60, Los Angeles, CA 90013, United States
- Open 24 Hours (Sunday – Friday)
By submitting, you agree to be contacted by Blue Moon Electrical about your request.
Circuit Breaker Replacement FAQs
Common questions about cost, timing, and permits for a panel upgrade.
Q. Can a Tesla Wall Connector charge non-Tesla cars?
The current Wall Connector can charge many non-Tesla EVs with the appropriate adapter, and the Universal Wall Connector includes a built-in adapter for broader compatibility. The circuit and install are the same either way.
Q. What circuit does a Wall Connector need?
A dedicated 240-volt circuit sized to the amperage you choose. The Wall Connector’s internal setting is matched to the breaker so it charges at full, safe speed for your wiring.
Q. Can two Wall Connectors share one circuit?
Yes. Wall Connectors support power-sharing, letting multiple units balance the available capacity on a circuit. That’s planned during installation so the wiring and settings support it.